Allrun 25C 6000mAh 6S 22.2V High C-rate LiPo Battery Pack
Welcome to Allrun high discharge(C-rate) lipo battery section, they are widely used in various fields, such as model aircraft ( RC ), medical equipment, drones for aerial and agricultural plant protection purposes, emergency power supplies, power tools, and so on.
The high rate discharge lithium polymer battery represents the charge and discharge capacity of lithium polymer batteries relative to the standard rate discharge lithium polymer battery. A lithium-polymer battery is normally measured using a "C" value to represent its charge and discharge current ratio. Batteries with a C-rate number higher than 1 are considered high-rate batteries. The larger the C-rate number of a li-polymer battery, the higher the rate of the li-polymer battery.
Datasheet
| Item |
Allrun 25C 6000mAh 6S 22.2V High C-rate LiPo Battery Pack
|
| Battery Type |
Rechargeable LiPo Battery |
| Capacity |
6000mAh |
| Normal Voltage |
22.2V |
| Thickness |
54mm MAX |
| Width |
48mm MAX |
| Length |
155mm MAX |
| Charge Cut-off Voltage |
25.2V |
| Discharge Cut-off Voltage |
18.0V |
| Standard Charge Current |
3000mA (0.5C) |
| Max Charge Current |
6000mA (1C) |
| Max Continuous Discharge Current |
150A (25C) |
| Pulse Discharge Current |
300A (for 2 seconds) |
| Connector |
TBD |
Safety Notes of High C-rate LiPo Battery
- Avoid using lead-acid, NiCd, or NiMH chargers.
- Be careful not to abuse these batteries, such as shorting, bending, crushing, or puncturing them.
- Charge and use should never be left unattended.
- Always inspect batteries and surrounding circuitry constantly for any damage, loose wiring, or the possibility of short circuits.
- Do not use or leave the battery at very high-temperature conditions(for example, strong direct sunlight or a vehicle in extremely hot conditions). Otherwise, it can overheat or fire, or its performance will degenerate and its service life will be decreased.
